Affiliation:
1. Southwest State University
Abstract
The purpose of this work was to study the elemental composition of titanium metal waste to be processed by the method of electroerosive dispersion into spherical powders suitable for additive manufacturing.Methods. When conducting experiments on X-ray fluorescence analysis of chemical composition, pieces of metal waste rods of a titanium alloy of an unknown brand were used. An X-ray fluorescence spectrometer Niton Goldd (USA) was used to determine the elemental composition and percentage of elements in the alloy under study. With this method, X-ray radiation is directed at the sample under study, the reflected wave spectrum is obtained and the characteristics of the spectrum of secondary fluorescent radiation of the sample are analyzed. In this case, electromagnetic waves form secondary X-ray radiation, i.e., characteristic lines that are characteristic of atoms of various elements and have their own individual characteristics. Thus, the elemental composition of the sample under study is determined, and the intensity of these lines shows the quantitative concentration of elements.Results. Using a portable Niton Goldd spectrometer, it was found that titanium metal waste corresponds to the grade of the OT4-0 alloy. The data obtained made it possible to identify samples of the studied metal waste to be processed by the method of electroerosive dispersion into spherical powders suitable for additive manufacturing. As a result of comparing the percentage of chemical elements of the studied metal waste and alloy OT4-0 according to GOST 19807-91, minor discrepancies were found due to the absence of elements such as O, Si, C, N and H. in metal waste. Apparently, this difference is related to their possible presence in small amounts up to 0.1% or complete absence.Conclusion. Renovation of metal waste, including titanium metal waste, will contribute to resource conservation, import substitution and ensuring the technological sovereignty of the Russian Federation.
Publisher
Southwest State University
Reference20 articles.
1. Ageev E. V., Ageeva E. V., Altukhov A. Yu. Otsenka vozmozhnosti primeneniya elektroerozionnykh kobal'tokhromovykh poroshkov dlya polucheniya izdelii metodom additivnogo proizvodstva [Assessment of the possibility of using electroerosive cobalt-chromium powders to obtain products by additive manufacturing]. Metallurg = Metallurg, 2021, no. 12, pp. 61–64. https://doi.org/10.52351/00260827_2021_12_61. EDN WLWUBF
2. Lovshenko F. G., Fedosenko A. S., Marukovich E. I. Teoreticheskie i tekhnologicheskie aspekty polucheniya mekhanicheski legirovannykh poroshkov dlya proizvodstva pokrytii i izdelii additivnymi metodami [Theoretical and technological aspects of obtaining mechanically alloyed powders for the production of coatings and products by additive methods]. Lit'e i metallurgiya = Casting and metallurgy, 2021, no. 4, pp. 90–105. https://doi.org/10.21122/1683-6065-2021-4-90-105. EDN ETYEQU
3. Koshmin A. N., Aleshchenko A. S., Patrin P. V., eds. Issledovanie uslovii goryachei deformatsii additivno vyrashchennykh zagotovok iz titanovogo splava VT6 s primeneniem konechno-elementnogo modelirovaniya [Investigation of the conditions of hot deformation of additively grown billets from titanium alloy VT6 using finite element modeling]. Metallurg = Metallurg, 2020, no. 11, pp. 100–106. EDN WEMEVE
4. Putyrsky S. V., Arislanov A. A., Artemenko N. I., Yakovlev A. L. Razlichnye metody povysheniya iznosostoikosti titanovykh splavov i sravnitel'nyi analiz ikh effektivnosti primenitel'no k titanovomu splavu VT23M [Various methods of increasing the wear resistance of titanium alloys and a comparative analysis of their effectiveness in relation to the VT23M titanium alloy]. Aviatsionnye materialy i tekhnologii = Aviation Materials and Technologies, 2018, no. 1(50), рp. 19–24. https://doi.org/10.18577/2071-9240-2018-0-1-19-24. EDN YNGXOH
5. Oryshchenko A. S., Leonov V. P., Mikhailov V. I. Titanovye splavy dlya glubokovodnoi morskoi tekhniki [Titanium alloys for deep-sea marine engineering]. Voprosy materialovedeniya = Issues of materials science, 2021, no. 3(107), pp. 238–246. https://doi.org/10.22349/1994-6716-2021-107-3-238-246. EDN YOLEKN