Development of Surface-Stabilized Fuel Injectors With Sub-Three PPM NOx Emissions

Abstract

ALZETA Corporation has developed surface-stabilized fuel injectors for use with lean premixed combustors which provide extended turndown and ultra-low NOx emission performance. These injectors use a patented technique to form interacting radiant and blue-flame zones immediately above a selectively-perforated porous metal surface. This allows stable operation at low reaction temperatures. This technology is a successful extension of ALZETA’s line of proven Pyromat™ SB metal fiber burners. A proof-of-concept injector in a full-pressure test rig at NETL in Morgantown, West Virginia achieved sub-3 ppm NOx emissions with concurrent single-digit CO emissions, both corrected to 15% O2. Operating conditions ranged between inlet pressures of 182.4 kPa (1.8 atm) and 1236.2 kPa (12.2 atm), inlet temperatures between 86° C (186° F) and 455° C (850° F) and calculated adiabatic flame temperatures between 1466° C (2670° F) and 1593° C (2900° F). Testing with prototype fuel injectors in test rigs at Solar Turbines last year yielded similar results. In May of 2001, a Solar Saturn 1 MW gas-turbine engine was operated to 95% load with a surface-stabilized injector. Programs are moving forward to adapt these injectors to the Solar Turbines Taurus 60 and Titan 130 engines. Engine tests are scheduled to begin in 2003.