Research on the traction characteristic evaluation of urban rail vehicles based on entropy weight TOPSIS

Abstract

This paper aims to investigate the influence of different speed at the end of the constant power section of the traction characteristic curve (TCC) on the vehicle dynamic performance and evaluate the TCC. A dynamics co-simulation model is developed in SIMPACK and MATLAB for dynamic analysis of the urban rail vehicle (URV) under different traction characteristics. Then it is used to investigate how acceleration distance and vehicle dynamic performance varies with the speed at the end of the constant power section of the TCC under different starting torques. Moreover, the entropy weight TOPSIS method which is widely used to solve the multi-objective decision-making problem is chosen to evaluate the traction characteristics based on various dynamic performance indexes over 25 test sections and acceleration distance. The results show that under traction conditions, the starting torque has effects on the lateral and vertical accelerations of car body, lateral and vertical wheel-rail contact forces, derailment coefficient and wheel unloading factor. The higher the torque, the greater the value of each index, that means the poorer the vehicle ride characteristics and running safety. For a given starting torque, the dynamic performance indexes increase with the increase of the speed at the end of the constant power section from 50 km/h to 80 km/h during the vehicle speed-up process. The maximum growth rate of the lateral and vertical accelerations of car body, lateral and vertical wheel-rail contact forces are 17%, 8%, 8% and 2%, respectively, when the speed at the end of the constant power section increases from 50 km/h to 80 km/h. Last, the comprehensive evaluation of traction characteristics using entropy-weight TOPSIS method reveals when the starting torque is 800 [Formula: see text], 1000 [Formula: see text], 1200 [Formula: see text] and 1400 [Formula: see text], the corresponding optimal speed at the end of the constant power section is 80 km/h, 80 km/h, 70 km/h and 50 km/h, respectively. The result of the study can provide theoretical support for traction characteristic design and traction control for URVs.