Comparison of the characteristics of journal bearings determined according to ISO 7902:2020 and obtained by other methods-Reference-Cited by-同舟云学术

Comparison of the characteristics of journal bearings determined according to ISO 7902:2020 and obtained by other methods

Published:2022-03-11 Issue:12 Volume:236 Page:2375-2391
ISSN:1350-6501
Container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
language:en
Short-container-title:Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology

Author:

Smykla Jan¹,Fillon Michel²,Olszewski Artur³,Żochowski Tomasz³,Gałda Lidia¹^ORCID

Affiliation:

1. Rzeszów University of Technology, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

2. Institut Pprime, CNRS – University of Poitiers, Boulevard Marie and Pierre Curie 11, Futuroscope, France

3. Gdańsk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk-Wrzeszcz, Poland

Abstract

The article presents selected characteristics of journal bearings calculated with the use of various methods and compared to the results obtained with application of the basic bearing characteristics calculation procedure, as described in the ISO 7902:2020 standard. Additionally, the presented calculation results were compared with the parameters measured during experimental tests of the sliding bearings, working under loads and at sliding velocity, and maintaining other operating conditions, as assumed in theoretical research. The regula falsi iteration method was successfully implemented. The research results have confirmed the usefulness of various calculation methods since the values of selected characteristics of the journal bearing obtained were comparable.

Publisher

SAGE Publications

Subject

Surfaces, Coatings and Films,Surfaces and Interfaces,Mechanical Engineering

Link

http://journals.sagepub.com/doi/pdf/10.1177/13506501221085048

Reference47 articles.

1. Recent thermohydrodynamic analyses and designs of thick-film bearings

2. Influence of geometric parameters and operating conditions on the thermohydrodynamic behaviour of plain journal bearings

3. Inertia Effect on the Thermohydrodynamic Characteristics of Journal Bearings

4. Cavitation formation and modelling for fluid film bearings: A review