Affiliation:
1. Department of Mechanical Engineering, Sant Longowal Institute of Engineering and Technology, Sangrur, India
Abstract
A novel methodology has been proposed to tame the arc shape by adopting an external magnetic field, resulting weld profile as required. The co-axial magnetic field developed by specially designed electromagnets is superimposed on the welding arc. It was found that 0-0-S-N configuration provided more penetration than conventional gas tungsten arc welding. A parametric window has been developed for the selected configuration to obtain the desired bead geometry. The experiments were performed using process parameters as suggested by the design matrix, developed using response surface method technique. Mathematical models were evolved from experimental data for penetration and bead width. The evolved model for penetration is adequate up to 99.72% confidence level and for bead width is 99.98% confidence level. The effects of process parameters have been presented in a graphical manner for better understanding. The penetration achieved with the magnetically controlled GTAW process is 3.92 mm, which is 30% more than that achieved with conventional GTAW. The bead width increases initially, up to a certain limit, and then reduces with an increase in excitation current. Further, the experiments have been conducted on the optimized parameters for the validation of models. The refined grains were obtained due to magnetic stirring of the molten pool, which is desirable for improvement in mechanical properties of welds. The average grain size was reduced from 42.55 to 31.03 µm. The improved microstructure containing more amount of acicular ferrite was obtained with magnetically controlled arc.