Effect of interface non-flatness on the fatigue behavior of adhesively bonded single lap joints-Reference-Cited by-同舟云学术

Effect of interface non-flatness on the fatigue behavior of adhesively bonded single lap joints

Published:2017-11-06 Issue:7 Volume:233 Page:1277-1286
ISSN:1464-4207
Container-title:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications
language:en
Short-container-title:Proceedings of the IMechE

Author:

Razavi SMJ¹,Ayatollahi MR¹^ORCID,Samari M¹,da Silva LFM²^ORCID

Affiliation:

1. Fatigue and Fracture Laboratory, Centre of Excellence in Experimental Solid Mechanic and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran

2. Departamento de Engenharia Mecanica, Faculdade de Engenharia da Universidade do Porto, Porto, Portugal

Abstract

This paper addresses numerical and experimental examination of the role of zigzag interface shapes on the load bearing capacity and fatigue life of adhesively bonded single lap joints. Aluminum adherends with non-flat zigzag interfaces were tested under both quasi-static and fatigue loading conditions. The quasi-static test results revealed that the non-flat adhesive joints have higher load bearing capacity compared to the conventional flat single lap joints. Comparative fatigue tests with different loading levels revealed that the non-flat zigzag single lap joint had considerably higher fatigue life than the conventional lap joint.

Publisher

SAGE Publications

Subject

Mechanical Engineering,General Materials Science

Link

http://journals.sagepub.com/doi/pdf/10.1177/1464420717739551

Reference31 articles.

1. Modulus grading versus geometrical grading of composite adherends in single-lap bonded joints

2. Stress analysis of adhesively-bonded lap joints

3. Metallic fiber-reinforced adhesively bonded joints

Cited by 16 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A comprehensive review of the S-N fatigue behaviour of adhesive joints;Journal of Advanced Joining Processes;2024-06

2. Enhancing Fatigue Life and Strength of Adhesively Bonded Composite Joints: A Comprehensive Review;Materials;2023-09-28

3. Experimental characterization and modelling of adhesive bonded joints under static and non-monotonic fracture loading in the mode II regime;International Journal of Adhesion and Adhesives;2023-05

4. Fatigue life evaluation of Al-GFRP bonded lap joints under four-point bending using strain-life criteria;International Journal of Adhesion and Adhesives;2023-02

5. Experimental study on mixing ratio effect of hybrid graphene nanoplatelet/nano-silica reinforcement on the static and fatigue life of aluminum-to-GFRP bonded joints under four-point bending;Composite Structures;2022-11