Structure and Mechanical Properties of Double Side Friction Stir Welded Aluminium AA6061 with the Addition of Cu Powder-Reference-Cited by-同舟云学术

Structure and Mechanical Properties of Double Side Friction Stir Welded Aluminium AA6061 with the Addition of Cu Powder

Published:2022-01-25 Issue: Volume:1051 Page:111-118
ISSN:1662-9752
Container-title:Materials Science Forum
language:
Short-container-title:MSF

Author:

Anggono Agus Dwi¹,Kholis Nur¹,Ngafwan ¹

Affiliation:

1. Universitas Muhammadiyah Surakarta

Abstract

The research objective is to investigate the formation of new compounds and the mechanical properties of Double Side Friction Stir Welding (DS-FSW) welding with Cu particle reinforcement. Aluminum alloys of AA6061 and 12 μm Cu powder were chosen as the main materials. The addition of Cu particles is conducted in single groove and double groove. The DS-FSW process uses CNC milling with a feed rate of 80 mm/minute and 1000 rpm of tool rotation. Observation of the microstructure was carried out by using optical metallography, and X-ray diffraction. Microhardness testing was done to determine the mechanical properties of the material. The results showed that the increase in the hardness value of 23.39% occurred in the double groove material. MMCs detected were Al2Cu, and AlCu2Mn.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.scientific.net/MSF.1051.111.pdf

Reference24 articles.

1. R. S. Mishra and Z. Y. Ma, Friction stir welding and processing,, Mater. Sci. Eng. R Reports, vol. 50, no. 1–2, p.1–78, 2005,.

2. A. D. Anggono, T. W. B. Riyadi, Sarjito, D. Triyoko, B. Sugito, and A. Hariyanto, Influence of tool rotation and welding speed on the friction stir welding of AA 1100 and AA 6061-T6,, AIP Conf. Proc., vol. 1977, no. June, 2018,.

3. V. K. Mohan, M. Shamnadh, and A. Sudheer, Fabrication and Characterization of Friction Stir Welding of AA6061 Using Copper Powder,, Mater. Today Proc., vol. 5, no. 11, p.24339–24346, 2018,.

4. B. Rahmatian, K. Dehghani, and S. E. Mirsalehi, Effect of adding SiC nanoparticles to nugget zone of thick AA5083 aluminium alloy joined by using double-sided friction stir welding,, J. Manuf. Process., vol. 52, no. October 2019, p.152–164, 2020,.

5. H. Mehdi and R. S. Mishra, Mechanical and microstructure characterization of friction stir welding for dissimilar alloy-A Review,, Int. J. Res. Eng. Innov., vol. 1, no. 5, p.57–67, 2017, [Online]. Available: http://www.ijrei.com.

Cited by 5 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The Influence of Air Pressure on Surface Roughness Values in the Sandblasting Process of ST-37 Steel Plates;The 7th Mechanical Engineering, Science and Technology International Conference;2024-04-24

2. Microstructural Analysis of Friction Stir Welding Using CuZn and Zn Fillers on Aluminum 6061-T6: A Comparative Study;The 7th Mechanical Engineering, Science and Technology International Conference;2024-02-26

3. Effect of zinc powder grain size on dissimilar metal resistance spot welding;5TH INTERNATIONAL CONFERENCE ON INNOVATIVE DESIGN, ANALYSIS & DEVELOPMENT PRACTICES IN AEROSPACE & AUTOMOTIVE ENGINEERING: I-DAD’22;2023

4. EFFECTS OF HOLDING TIME ON MICROSTRUCTURE AND SHEAR STRENGTH OF RESISTANCE SPOT-WELDED JOINTS BETWEEN MILD STEEL AND ALUMINUM WITH ZINC POWDER FILLER;High Temperature Material Processes An International Quarterly of High-Technology Plasma Processes;2023

5. The Effect of Tool Rotation on Structure and Mechanical Properties in Friction Stir Welding Of Aluminum AA5052;Journal of Modern Mechanical Engineering and Technology;2022-12-25