The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members-Reference-Cited by-同舟云学术

The Assessment of the Residual Stresses Influence on Generation of the Infringement in Shape-Complex Supporting Members

Published:2019-05-01 Issue:1 Volume:69 Page:85-96
ISSN:2450-5471
Container-title:Strojnícky casopis – Journal of Mechanical Engineering
language:en
Short-container-title:

Author:

Pástor Miroslav¹,Čarák Peter¹,Gömöry Imrich¹

Affiliation:

1. Technical University of Košice , Faculty of Mechanical Engineering, Department of Applied Mechanic and Mechanical Engineering , Letná 9, 042 00 Košice , Slovakia

Abstract

Abstract The aim of the paper is to assess the effect of residual stresses on the damage of the slide bearer. To quantify the residual stresses, the drilling method using SINT MTS 3000 drilling machine was chosen. The tensometric rosette application areas were determined based on the analysis of the results obtained by numerical modeling using the finite element method. Experimental measurement was performed on one unused slide bearer and on the other one, which during its present operation had completed about 9.106cycles. At the end of the paper, the analysis of the measured residual stress values in chosen locations is presented.

Publisher

Walter de Gruyter GmbH

Subject

Mechanical Engineering

Link

https://www.sciendo.com/pdf/10.2478/scjme-2019-0007

Reference20 articles.

1. [1] available on the internet “bogie”

2. [2] Búry, M. “Residual Stress in Elastic Side Friction Block”, TUKE, p. 68, 2018.

3. [3] Fürbacher, I. “Lexicon of technical materials”, Praha: Dashöfer, 1998 – 2006. ISBN 80-86229-02-5.

4. [4] Schajer, G. S. “Practical residual stress measurement methods”, John Wiley & Sons Ltd, The Atrium, Southern Gate, Chichester, West Sussex, PO19 8SQ, United Kingdom, 2013. ISBN 978-1-118-34237-4.

5. [5] Trebuňa, F., Šimčák, F. “Quantification of residual stresses by tensometry” (in Slovak), TUKE, p. 134, 2005.

Cited by 3 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. A Complex Review of the Possibilities of Residual Stress Analysis Using Moving 2D and 3D Digital Image Correlation System;Strojnícky časopis - Journal of Mechanical Engineering;2021-09-01

2. Stress Distribution in a Plate with a Holes Along the Diagonal Distribution Under Plane Biaxial Load;Strojnícky časopis - Journal of Mechanical Engineering;2020-11-01

3. Research of Maximum Stress Zones in Circular Plates with Loades Concentrated Force;Strojnícky časopis - Journal of Mechanical Engineering;2020-11-01