The enhanced dewaterability of sludge by a starch-based flocculant combined with attapulgite

Abstract

AbstractCoagulation/flocculation is one of the most widely used and cost-effective pretreatment methods for improving the dewaterability of sludge. In this study, a cationic modified starch-based flocculant (St-CTA) in conjunction with a popular clay, attapulgite (ATP), was used for the conditioning of waste-activated sludge. The dewatering properties, including the filter cake moisture content, filtration specific resistance, capillary suction time, filtration rate and compressibility coefficient, were measured and compared by varying the doses of St-CTA and ATP. By combination of the apparent dewatering performance and the changes in the contents and distributions of the extracellular polymeric substance (EPS) fractions and components, sludge flocs, and microstructures of sludge cakes, the dewatering mechanisms were discussed in detail. St-CTA in conjunction with ATP can exhibit an enhanced dewaterability of sludge and the water content in final sludge cake can be stably reduced below 80% owing to the synergistic effects of St-CTA and ATP. In addition to the efficient charge neutralization of St-CTA, ATP not only acts as a skeleton builder in the sludge dewatering process which makes the sludge flocs more compact and improves the filterability and permeability, but also tightly interacts with the proteins in EPS of the sludge which reduces the protein content and further enhances the dewatering effect. This study provides an economical, green, and effective way to further improve the dewaterability of sludge.