Experimental research and application of drilling and blasting with directional damage-reduction shaped charge

Abstract

AbstractIn this research, a directional reduction charging structure was proposed to solve the problems caused by drilling and blasting method such as serious damage to surrounding rocks, working face low contour flatness and serious over-under break of root base c. Drilling and blasting tests, numerical calculations and field applications were designed and performed for the verification of the blasting advantages of charge structure. Test results showed that the peak positive strain along the protection direction of directional protection shaped charge was significantly smaller than that of ordinary charge, where PVC material presented the strongest effect such that the peak positive strain of specimen 1 at measuring point 4 (protection direction) was only 0.27 times that at measuring point 9 (non-protected direction). Numerical simulations indicated shaped jet formation, damage-reduction and charge penetration process and obtained the force law of cement target plate. Experimental results revealed that application of charge in tunnel controlled blasting achieved a clear controlling effect on contour line excavation. Compared with ordinary smooth blasting method, all technical indicators of the developed method were improved such that half hole mark rate was increased by about 33% and the amount of over-under break was decreased by about two times. Research results are of certain significance for the stability of surrounding reserved rocks and formation of roadway in blasting engineering and the developed method was found to be applicable to mining, shaft excavation and other projects.