Increasing the durability of cold forging dies hardening with intermediate tempering-Reference-Cited by-同舟云学术

Increasing the durability of cold forging dies hardening with intermediate tempering

Published:2022-10-14 Issue:3 Volume: Page:91-95
ISSN:2414-0406
Container-title:Litiyo i Metallurgiya (FOUNDRY PRODUCTION AND METALLURGY)
language:
Short-container-title:Litʹë metall.

Author:

Berdiev D. M.¹,Toshmatov R. K.¹,Abdullaev A. Kh.¹

Affiliation:

1. Tashkent State Technical University named after I. Karimov

Abstract

Based on studies of the tool wear nature for cold stamping, the expediency of using heat treatment by quenching with intermediate tempering has been established. Considering that the dislocation density changes little at 1100–1150 ºС, it was recommended this specific temperature range for heat treatment. Intermediate tempering at 450 ºС is the most preferable, as it provides not only dislocation structure stabilization, but also reduces internal stresses after the first hardening. This treatment increases the durability of the forging tool by 2–3 times.

Publisher

Belarusian National Technical University

Subject

Pulmonary and Respiratory Medicine,Pediatrics, Perinatology, and Child Health

Reference13 articles.

1. Okolovich G.A. Shtampovie stali dlya xolodnogo deformirovaniya metallov [Die steels for cold forming of metals]. Barnaul: AltGTU Publ., 2010, 202 р.

2. Brikov M. N., Efremenko V. G., Efremenko A. V. Iznosostoykost staley i chugunov pri abrazivnom iznashivanii [Wear resistance of steels and cast irons under abrasive wear]. Xerson, Grin D. S. Publ., 2014, 364 p.

3. Goldshteyn M. I., Grachev S. V., Vekeler Yu. G. Spetsialnoe stali [Special steel]. Moscow, MISiS Publ., 1999, 408 p.

4. Mukhamedov A.A. The Influence of the Thermal History on the structure and Properties of Steel. The physics of Metals and Metallography, 1992, vol. 74, no. 5, pp. 482–487.

5. Yugay S. S., Kleyner L. M., Shotsev A.A., Mitroxovich I. N. Strukturnaya nasledstvennost v nizkouglerodistix martensitnix stalyax [Structural heredity in low‑carbon martensitic steels]. Metallovedenie i termicheskaya obrabotka metallov =Metal Science and Heat Treatment of Metals, 2004, no. 12, pp. 24–29.