Numerical Approach Regarding the Effect of the Flight Shape on the Performance of Rotary Dryers from Asphalt Plants

Abstract

Thedistribution of aggregates in the cross-section of the drum, in the case of equipment used for the production of asphalt mixtures, essentially influences the performance of rotary dryers. In the research carried out in this article, the optimization of the distribution of particles in the active region of the drum was pursued by modifying the geometric shape of the flights, taking into account at the same time the influence of the technological parameters of operation such as drum rotation speed and drum filling degree. The studies were performed using the discrete element method (DEM), and the obtained results revealedthat flight geometry strongly influences drying efficiency. The efficiency of rectangular double-angled type flights is strongly influenced by the drum rotation speed, especially at high levels of filling degree (20%), with the mass of aggregates exposed to drying increasing by 41.11% when drum rotation speed increases from 10 rpm to 15 rpm. Similarly, hook-type flights show a minimum efficiency at 15% filling degree and 15 rpm. The comparative analysis of the flight shape is not only carried out in order to establish the variant that ensures maximum drying efficiency but also from the point of view of execution technology. (Original flights can be obtained by deep drawing, but they have a complex geometric configuration; cup flights can be obtained very easily from tubular material cut on the generators; hook flights by deep drawing or welding the cut tubular material on a straight plate, and the L type by deep drawing). Taking into account that semi-finished products can be very thick, it is possible that, in some cases, hot embossing is necessary, so making them out of tubular material eliminates these inconveniences. All the presented results highlight that the rectangular, double-angled and hook-type flights are the most appropriate shapes that can be used regardless of the drum filling degree and rotation speed.