Abstract
In this paper, a backstepping sliding mode controller based on a nonlinear disturbance observer (NDO-SMC) is proposed to realize the high-performance speed control of a permanent magnet synchronous motor (PMSM). This paper compares the advantages and disadvantages of the traditional backstepping sliding mode control algorithm (SMC) and integral backstepping sliding mode control algorithm (I-SMC) in the face of mismatched disturbances. In view of the shortcomings of these two algorithms, the idea of using a disturbance observer to observe disturbance and carry out dynamic compensation is proposed, and the composite controller is designed. The overshoot and settling time is improved by 30% and 8 s, respectively, for the proposed NDO-SMC controller compared with the SMC controller. The simulation and experimental results illustrate that the designed controller not only effectively solves the torque jitter problem of SMC, but also improves the overshoot problem caused by the integral module of I-SMC. There is also a better matching degree between the theoretical derivation, the simulation results, and experimental data. It also proves that the composite control algorithm proposed in this paper provides a meaningful solution to the operation disturbance suppression problem of the permanent magnet synchronous motor.
Funder
Heilongjiang postdoctoral research starting fund
National Natural Science Foundation of China
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference28 articles.
1. Tang, P., Dai, Y., and Li, Z. Unified Predictive Current Control of PMSMs with Parameter Uncertainty. Electronics, 2019. 8.
2. Robust position anti-interference control for PMSM servo system with uncertain disturbance;Li;China Electrotech. Soc. Trans. Electr. Mach. Syst.,2020
3. Hoai, H.-K., Chen, S.-C., and Than, H. Realization of the Sensorless Permanent Magnet Synchronous Motor Drive Control System with an Intelligent Controller. Electronics, 2020. 9.
4. Investigations of the Influence of PMSM Parameter Variations in Optimal Stator Current Design for Torque Ripple Minimization;Lai;IEEE Trans. Energy Convers.,2017
5. Torque ripple minimization for direct torque control of PMSM with modified FCSMPC;Liu;IEEE Trans. Ind. Appl.,2016
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献