Affiliation:
1. Jiangxi Provincial Key Laboratory of Low-Carbon Processing and Utilization of Strategic Metal Mineral Resources, School of Resources and Environmental Engineering, Jiangxi University of Science and Technology, Ganzhou 341000, China
2. Jiangxi Building Materials Research and Design Institute Co., Ltd., Nanchang 330001, China
Abstract
Mechanical grinding is a common method used to enhance the pozzolanic activity of tailings, and these activated tailings can be used as supplementary cementitious materials in cement production. However, the addition of activated tailings usually reduces the workability of cement paste, and the mechanism of influence of different minerals in tailings on workability varies. In this study, three kinds of principal silicate minerals in tailings—quartz, feldspar, and mica—were mechanically activated. The influence of these activated minerals on the rheological properties of cement paste were studied in the absence or presence of PCE (polycarboxylate ether) superplasticizers, and the influence mechanism was investigated using rheology, TOC, contact angles, zeta potential, XPS, ICP-OES, and XRD. The results showed that quartz has the highest fluidity, and mica has the lowest. An increase in hydrophilicity decreased the flowability of the blended cement paste. The increase in the metal cation dissolution rate was the main reason for the decrease in the fluidity of PCE-blended cement pastes. The knowledge gained provides a valuable reference for the utilization of activated tailings in cement production.
Funder
the national key R&D project of China