Optical and Structural Properties of Aluminum Nitride Epi-Films at Room and High Temperature

Abstract

The high-quality aluminum nitride (AlN) epilayer is the key factor that directly affects the performance of semiconductor deep-ultraviolet (DUV) photoelectronic devices. In this work, to investigate the influence of thickness on the quality of the AlN epilayer, two AlN-thick epi-film samples were grown on c-plane sapphire substrates. The optical and structural characteristics of AlN films are meticulously examined by using high-resolution X-ray diffraction (HR-XRD), scanning electron microscopy (SEM), a dual-beam ultraviolet-visible spectrophotometer, and spectroscopic ellipsometry (SE). It has been found that the quality of AlN can be controlled by adjusting the AlN film thickness. The phenomenon, in which the thicker AlNn film exhibits lower dislocations than the thinner one, demonstrates that thick AlN epitaxial samples can work as a strain relief layer and, in the meantime, help significantly bend the dislocations and decrease total dislocation density with the thicker epi-film. The Urbach’s binding energy and optical bandgap (Eg) derived by optical transmission (OT) and SE depend on crystallite size, crystalline alignment, and film thickness, which are in good agreement with XRD and SEM results. It is concluded that under the treatment of thickening film, the essence of crystal quality is improved. The bandgap energies of AlN samples obtained from SE possess larger values and higher accuracy than those extracted from OT. The Bose–Einstein relation is used to demonstrate the bandgap variation with temperature, and it is indicated that the thermal stability of bandgap energy can be improved with an increase in film thickness. It is revealed that when the thickness increases to micrometer order, the thickness has little effect on the change of Eg with temperature.