A Novel CEM-Based 2-DOF PID Controller for Low-Pressure Turbine Speed Control of Marine Gas Turbine Engines

Abstract

Gas turbine engines have several advantages over piston reciprocating engines, such as higher output per unit volume, reduced vibration, rapid acceleration and deceleration, high power output, and clean exhaust gases. As a result, their use for propulsion in ships has been steadily increasing. However, gas turbine engines exhibit significant parameter variations depending on the rotational speed, making the design of controllers to ensure system stability while achieving satisfactory control performance, a very challenging task. In this paper, a novel CEM-based 2-DOF PID controller design technique is proposed to ensure the stability of a gas turbine engine while improving tracking and disturbance rejection performance. The proposed controller consists of a PID controller focused on enhancing disturbance rejection performance and a set-point filter to improve tracking performance. The set-point filter is composed of gains from the controller and a single weighting factor. When tuning the gains of the controller, the maximum sensitivity is considered to maintain an appropriate balance between system stability and response performance. The key novelty of this study can be summarized in two main points. One is that the controller is designed by matching characteristic equations, and by setting the roots of the desired characteristic equation as multipoles, the gains of the PID controller can be tuned with only one adjusting variable, making the tuning of the 2-DOF controller easier. The other is that the controller parameters are tuned based on maximum sensitivity, thus taking into account the robust stability of the control system. To demonstrate the feasibility of the proposed method, simulations are conducted for four scenarios using various performance indices.