Affiliation:
1. Department of Mechanical Engineering, Taiyuan Institute of Technology, Taiyuan 030008, China
Abstract
This paper studied the effect of the longitudinal magnetic field (LMF) on the microstructure evolution and mechanical properties of AZ40 argon tungsten arc welding joints. Magnetic field-assisted argon tungsten arc welding technology was used to achieve butt welding of an AZ40 Mg alloy sheet with a thickness of 1.5 mm. The microstructure of the Mg alloy weld was studied by using metallographic microscopy and scanning electron microscopy. Mechanical performance of the Mg alloy weld was evaluated by using a hardness tester and universal tensile machine. The experimental results revealed that the average crystallite dimension of the weld zone of the Mg alloy joint reached 43 μm without an LMF. By introducing LMF-assisted technology, the weld structure was significantly refined and the average crystallite dimension of the weld seam was reduced by 39.5% to 26 μm with a coil current of 1.2 A. For the joint without magnetic field assistance, the optimum tensile strength of the AZ40 weldment was 225 MPa under a welding current of 80 A, and fracture occurred in the center of joint welding seam. Under an LMF coil current of 1.2 A, the joint strength increased from the initial 225 MPa to 254 MPa, and fracture occurred at the weld edge with obvious plastic fracture characteristics. It can be confirmed that the LMF-assisted welding process effectively improved the microstructure characteristics of the weld seam and strengthened the microhardness and mechanical performance of the AZ40 joint.