Forest Height Inversion via RVoG Model and Its Uncertainties Analysis via Bayesian Framework—Comparisons of Different Wavelengths and Baselines
Author:
Zhang Yongxin1ORCID, Zhao Han1, Ji Yongjie2ORCID, Zhang Tingwei1, Zhang Wangfei1ORCID
Affiliation:
1. College of Forestry, Southwest Forestry University, Kunming 650224, China 2. School of Geography and Ecotourism, Southwest Forestry University, Kunming 650224, China
Abstract
Accurate estimation of forest height over a large area is beneficial to reduce the uncertainty of forest carbon sink estimation, which is of great significance to the terrestrial carbon cycle, global climate change, forest resource management, and forest-related scientific research. Forest height inversion using polarimetric interferometry synthetic aperture radar (PolInSAR) data through Random volume over ground (RVoG) models has demonstrated great potential for large-area forest height mapping. However, the wavelength and baseline length used for the PolInSAR data acquisition plays an important role during the forest height estimation procedure. In this paper, X–, C–, L–, and P–band PolInSAR datasets with four different baseline lengths were simulated and applied to explore the effects of wavelength and baseline length on forest height inversion using RVoG models. Hierarchical Bayesian models developed with a likelihood function of RVoG model were developed for estimated results uncertainty quantification and decrease. Then a similar procedure was applied in the L– and P–band airborne PolInSAR datasets with three different baselines for each band. The results showed that (1) Wavelength showed obvious effects on forest height inversion results with the RVoG model. For the simulated PolInSAR datasets, the L– and P–bands performed better than the X– and C–bands. The best performance was obtained at the P–band with a baseline combination of 10 × 4 m with an absolute error of 0.05 m and an accuracy of 97%. For the airborne PolInSAR datasets, an L–band with the longest baseline of 24 m in this study showed the best performance with R2 = 0.64, RMSE = 3.32 m, and Acc. = 77.78%. (2) It is crucial to select suitable baseline lengths to obtain accurate forest height estimation results. In the four baseline combinations of simulated PolInSAR datasets, the baseline combination of 10 × 4 m both at the L– and P–bands performed best than other baseline combinations. While for the airborne PolInSAR datasets, the longest baseline in three different baselines obtained the highest accuracy at both L– and P–bands. (3) Bayesian framework is useful for estimation results uncertainty quantification and decrease. The uncertainties related to wavelength and baseline length. The uncertainties were reduced obviously at longer wavelengths and suitable baselines.
Funder
National Natural Science Foundation of China Agriculture joint special project of Yunnan province
Reference42 articles.
1. Importance of Biomass in the Global Carbon Cycle: Biomass in the global carbon cycle;Houghton;J. Geophys. Res.,2009 2. Liu, X., He, L., He, Z., and Wei, Y. (2022). Estimation of Broadleaf Tree Canopy Height of Wolong Nature Reserve Based on InSAR and Machine Learning Methods. Forests, 13. 3. Zhao, R., Cao, S., Zhu, J., Fu, L., Xie, Y., Zhang, T., and Fu, H. (2023). A Dual–Baseline PolInSAR Method for Forest Height and V ertical Profile Function Inversion Based on the Polarization Coherence Tomography Technique. Forests, 14. 4. Wang, L., Zhou, Y., Shen, G., Xiong, J., and Shi, H. (2023). Forest Height Inversion Based on Time–Frequency RVoG Model Using Single–Baseline L–Band Sublook–InSAR Data. Remote. Sens., 15. 5. Potential of Space–Borne PolInSAR for Forest Canopy Height Estimation Over India—A Case Study Using Fully Polarimetric L –, C –, and X –Band SAR Data;Khati;IEEE J. Sel. Top. Appl. Earth Obs. Remote. Sens.,2018
|
|