Abstract
Composite materials are materials with anisotropic properties that are created by combining several different components in a way that allows the best qualities of each component to be used. In this paper, raw materials were used to obtain composite materials of the type TPU/PP/BaTiO3 powder. The thermogravimetric analysis, dynamic differential calorimetry, and scanning electron microscopy were carried out. The preliminary tests for making specific filaments for 3D printing with a diameter of 1.75 mm were carried out on a laboratory extruder. The purpose of the experiment was to develop the optimal extrusion temperatures and the speed of drawing the filament to make filaments with rigorously constant dimensions, and the variation in diameter had a maximum of 10%.
Funder
Technical University of Iasi
Subject
Polymers and Plastics,General Chemistry
Reference57 articles.
1. Polymer/layered silicate nanocomposites: A review from preparation to processing;Suprakas;Prog. Polym. Sci.,2003
2. Mark, L.H., Zhao, C., Chu, R.K.M., and Park, C.B. (2022). Mechanical Properties of Injection Molded PP/PET-Nanofibril Composites and Foams. Polymers, 14.
3. Synthesis and properties of nylon-6/clay hybrids;Okada;Polym. Chem.,1990
4. Mark, J.E. (December, January 24). Polymer based molecular composites. Proceedings of the Materials Research Society (MRS) Symposium, Pittsburgh, PA, USA.
5. Polymer layered silicate nanocomposites;Giannelis;Adv. Mater.,1996