Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. I: System-Level Response-Reference-Cited by-同舟云学术

Experimental Seismic Response of a Full-Scale Cold-Formed Steel-Framed Building. I: System-Level Response

Published:2016-12 Issue:12 Volume:142 Page:04016127
ISSN:0733-9445
Container-title:Journal of Structural Engineering
language:en
Short-container-title:J. Struct. Eng.

Author:

Peterman Kara D.¹,Stehman Matthew J. J.²,Madsen Rob L.³,Buonopane Stephen G.⁴,Nakata Narutoshi⁵,Schafer Benjamin W.⁶

Affiliation:

1. Postdoctoral Research Associate, Dept. of Civil and Environmental Engineering, Northeastern Univ., Boston, MA 02115; formerly, Graduate Research Assistant, Johns Hopkins Univ., Baltimore, MD 21218 (corresponding author).

2. Environments Engineer, SpaceX, 1 Rocket Rd., Hawthorne, CA 90250; formerly, Graduate Research Assistant, Johns Hopkins Univ., Baltimore, MD 21218.

3. Senior Project Engineer, Devco Engineering, 245 NE Conifer Blvd., Corvallis, OR 97330.

4. Associate Professor, Dept. of Civil and Environmental Engineering, Bucknell Univ., Lewisburg, PA 17837.

5. Assistant Professor, Dept. of Civil and Environmental Engineering, Clarkson Univ., Potsdam, NY 13699; formerly, Assistant Professor, Johns Hopkins Univ., Baltimore, MD 21218.

6. Professor, Dept. of Civil Engineering, Johns Hopkins Univ., Baltimore, MD 21218.

Publisher

American Society of Civil Engineers (ASCE)

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science,Building and Construction,Civil and Structural Engineering

Link

http://ascelibrary.org/doi/pdf/10.1061/%28ASCE%29ST.1943-541X.0001577

Reference33 articles.

1. AISI (American Iron and Steel Institute). (2007). “North American standard for cold-formed steel farming—Lateral design.” AISI S213 Washington DC.

2. AISI (American Iron and Steel Institute). (2012a). “North American specification for the design of cold-formed steel structural members.” AISI S100 Washington DC.

3. AISI (American Iron and Steel Institute). (2012b). “North American standard for cold-formed steel framing—General provisions.” AISI S200 Washington DC.

4. Inelastic performance of cold-formed steel strap braced walls

5. ASCE. (2005). “Minimum design loads for buildings and other structures.” ASCE 7 Reston VA.

Cited by 54 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Practice-oriented numerical model for seismic response of cold-formed steel-framed mid-rise buildings;Engineering Structures;2024-11

2. Fire behavior of full-scale cold-formed steel center-sheathed shear walls under combined loads;Journal of Constructional Steel Research;2024-07

3. Experimental hysteretic response of cold-formed steel fastened connections sheathed with fiber-cement boards with varied edge distance;Engineering Structures;2024-03

4. Experimental investigation on seismic performance of cold-formed steel strap-braced stud walls under lateral cyclic and vertical loading;Thin-Walled Structures;2024-01

5. Physical damage‐hysteretic response correlation for steel sheet sheathed cold‐formed steel‐framed wall‐lines;Earthquake Engineering & Structural Dynamics;2023-12-19