Metamaterial Engineering for Superior HgTe cQD Photodetector Performance

Abstract

AbstractHighly responsive, low noise, and inexpensive photodetectors that operate in the mid‐infrared (MIR) wavelength regime are in high demand for applications ranging from fundamental science to large scale industries. However, simultaneously achieving all this in one device architecture is very challenging. In this work, mercury telluride (HgTe) colloidal quantum dot (cQD) based photodetectors are systematically improved by the introduction of new metamaterial designs. The new designs are found by utilizing simulations. Thereby the structures are optimized to increase the responsivity and simultaneously decrease the noise spectral current density. This is achieved by focusing on improving the photogenerated charge carrier collection efficiency while reducing the active material volume without altering the near unity absorption. A standard metamaterial perfect absorber architecture based on disc resonators is used as a starting point for the optimization process. By optimizing the carrier extraction through contact engineering, resulting in a narrow slot metamaterial, an overall ≈13‐fold responsivity and ≈345‐fold detectivity increase is achieved. The final metamaterial design reaches a responsivity of 16.2 A W−1 and detectivity of 6×108 Jones at a wavelength of 2710 nm. The analysis therefore provides a route to improve the responsivity and noise characteristics of mid‐infrared photodetectors based on cost‐efficient colloidal quantum dots.