Abrasive waterjet cutting of r‐GO infused magnesium fiber metal laminates: Experimental investigations and optimization through gorilla troops algorithm

Abstract

AbstractLaminated metal‐composite structures, known as fiber metal laminates (FMLs), are modern lightweight materials extensively utilized in diverse industries such as aerospace and automotive manufacturing. These materials offer enhanced impact and fatigue resistance, making them invaluable for various applications. However, machining FMLs poses a challenge due to the occurrence of delamination and heterogenous in nature during conventional methods. Therefore, this study aims to investigate the quality characteristics such as kerf width, surface roughness and kerf taper of Magnesium based FMLs processed with an unconventional machining process namely abrasive water jet cutting (AWJC). These FMLs comprise alternately stacked kevlar/carbon fibers adhesively bonded with epoxy resin matrix filled with varying wt% of reduced graphene oxide (r‐GO), combined with AZ31B alloy sheet as the skin material. AWJC experiments were performed by varying the process parameters including waterjet pressure (275–325 MPa), stand‐off distance (2.5–3.5 mm), and cutting speed (600–800 mm/min) based on the box–behnken experimental design. The findings from the statistical analysis underscore the significant influences of stand‐off distance and waterjet pressure on kerf characteristics, while the inclusion of r‐GO is observed to notably affect the surface quality. In pursuit of enhancing cut quality, a multi‐response optimization was conducted employing the Gorilla Troops Optimization (GTO) algorithm. Comparative analysis with established metaheuristics like the gray wolf algorithm, dragonfly algorithm, and harmony search algorithm reveals GTO's superior performance across various metrics, including rapid convergence, diversity, and spacing values. Further, the cutting‐induced damages such as matrix plowing, fiber‐metal debonding and composite delamination were observed through microstructure analysis.Highlights Magnesium (AZ31B) fiber metal laminate comprising with various wt% of reduced graphene oxide was fabricated. Abrasive waterjet cutting of FMLs were performed based on box–behnken design experimental approach. Statistical analysis and influence of process parameters on the kerf width, surface roughness and kerf taper were investigated. Multi‐response optimization was carried out using metaheuristic‐based gorilla troops algorithm.