Optimizing Cutting Conditions for Minimum Surface Roughness in Face Milling of High Strength Steel Using Carbide Inserts

Abstract

A full factorial design technique is used to investigate the effect of machining parameters, namely, spindle speed(N), depth of cut(ap),and table feed rate(Vf),on the obtained surface roughness (RaandRt) during face milling operation of high strength steel. A second-order regression model was built using least squares method depending on the factorial design results to approximate a mathematical relationship between the surface roughness and the studied process parameters. Analysis of variance was conducted to estimate the significance of each factor and interaction with respect to the surface roughness. ForRa, the results show that spindle speed, depth of cut, and table feed rate have a significant effect on the surface roughness in both linear and quadratic terms. There is also an interaction between depth of cut and feed rate. It also appears that feed rate has the greatest effect on the data variation followed by depth of cut. ForRt, the results show that the table feed rate is the most effective factor followed by the depth of cut, while the spindle speed had a significant small effect only in its quadratic term. The conditions of minimumRaandRtare identified through least square optimization. Moreover, multiobjective optimization for minimizingRaand maximizing metal removal rateQis conducted and the results are presented.