RELEVANCE OF COLD-ROLLING TECHNOLOGY FOR THE TEXTURE AND ANISOTROPY OF EN AW-8011A ALUMINUM ALLOYS
-
Published:2023-12-11
Issue:6
Volume:57
Page:
-
ISSN:1580-3414
-
Container-title:Materiali in tehnologije
-
language:
-
Short-container-title:Mater. Tehnol.
Author:
Kraner Jakob,Kim Kyung Il,Kim Bonghwan,Kim Shae K.,Paulin Irena
Abstract
The combined effects of the reduction ratio and annealing conditions during cold rolling were investigated for the texture and anisotropy of an EN AW-8011A aluminium alloy. To characterize the microstructural and textural differences, a scanning electron microscope with electron back-scattered diffraction was used. To achieve low anisotropy, the three key factors of texture were exposed: a low fraction of deformed grains according to the average grain misorientation, a large amount of random texture components and the equivalent ratio between deformed and recrystallised texture components. The results of crystallographic texture analysis and anisotropy values revealed that the higher ratio of total cold deformation (cold rolling reduction) and the higher ratio of cold deformation after the intermediate annealing were more favourable for the final continuous annealing in terms of decreasing anisotropy. In contrast, the lower ratio of the cold deformation resulted in lower anisotropy when implementing batch annealing.
Publisher
Institute of Metals and Technology
Subject
Metals and Alloys,Polymers and Plastics
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献