Technologies for processing materials based on glass-fiber materials-Reference-Cited by-同舟云学术

Technologies for processing materials based on glass-fiber materials

Published:2021-06-30 Issue:6 Volume:2021 Page:24-28
ISSN:2223-4608
Container-title:Science intensive technologies in mechanical engineering
language:en
Short-container-title:

Author:

Golubeva Kseniya¹,Noskov Aleksey²

Affiliation:

1. Kazan State Technical University

2. Kazan National Research Technical University named after A.N. Tupolev

Abstract

The review of basic methods for glass-fiber material machining is shown, characteristic features are presented also advantages and drawbacks of different processing methods are mentioned. There is shown a description of glass-fiber material edge machining. The alternative methods such as hydro-abrasive cutting and laser working are considered.

Publisher

Bryansk State Technical University BSTU

Reference10 articles.

1. Грищенко, Т.А., Мелюхов, Н.И., Любушкин, В.О. Применение гидроабразивной резки при обработке деталей из полимерных композиционных материалов // Вестник инженерной школы ДВФУ. – 2017. – № 2 (31). – С. 49-55., Grishchenko, T.A., Melyukhov, N.I., Lyubushkin, V.O. Hydro-abrasive cutting use at polymeric composite parts processing // Bulletin of Engineering School of DVFU. – 2017. – No.2(31). – PP. 49-55.

2. Ющенко, Д.А., Лобанов, Д.В. Методы лезвийной обработки изделий из композиционных материалов их специфика и перспективы // Технологии и материалы. – 2015. – №3. – С. 30-35., Yushchenko, D.A., Lobanov, D.V. Methods for compo-site edge processing, their peculiarities and outlooks // Tech-nologies and Materials. – 2015. – No.3. – PP. 30-35.

3. Раскутин, А.Е., Хрульков, А.В., Гирш, Р.И. Технологические особенности механообработки композиционных материалов при изготовлении деталей конструкций (обзор) // Труды ВИАМ. – 2016. – № 9 (45). – С. 12., Raskutin, A.E., Khrulkov, A.V., Girsh, R.I. Technologi-cal peculiarities of composite machining at manufacturing structure parts (review) // Proceedings of VIAM. – 2016. – No.9 (45). – PP. 12.

4. Журавлева, Т.А. Технологическое обеспечение качества гидроабразивного резания стеклопластиков за счет управления параметрами прошивки: дис. канд. техн. наук. – Орел. – 2015. – 171 с., Zhuravlyova, T.A. Quality Technological Support of Fi-berglass Hydro-abrasive Cutting with Piercing Parameter Control: Can. Sc. Tech. thesis. – Orel. – 2015. – PP. 171.

5. Chang, C.S. Turning of glass–fiber reinforced plastics materials with chamfered main cutting edge carbide tools // Journal of Materials Processing Technology. vol. 180. – PP. 117-129., Chang, C.S. Turning of glass–fiber reinforced plastics materials with chamfered main cutting edge carbide tools // Journal of Materials Processing Technology. vol. 180. – PP. 117-129.