Tensile forces in the neurovascular bundle: A contributor to orthodontic relapse?

Abstract

AbstractObjectivesThe aim of this study is to investigate the neurovascular bundle (NVB) as a potential orthodontic relapse factor. The mechanical properties and the forces generated in the NVB after orthodontic extrusion are explored.Materials and MethodsSix NVBs branching from the inferior alveolar nerve to the apices of the mandibular canines and premolars of mature pigs were harvested. Stress relaxation tests were conducted. A standard linear solid model (SLS) was utilized to simulate the orthodontic extrusion of a single rooted tooth with NVB length and cross‐sectional diameter of 3.6 and 0.5 mm, respectively, so the NVB was stretched 10% and 20% of its original length. The maximum force within the NVB was then calculated.ResultsBased on our data, the average Young's modulus before relaxation (), after relaxation () and the difference between Young's moduli before and after relaxation () were 324 ± 123, 173 ± 73 and 151 ± 52 kPa, respectively. The theoretical force within the NVB stretched to 10% and 20% strain was 3 and 5 mN, respectively.ConclusionThe data from our study indicate that the NVB exhibits stress relaxation, a characteristic trait of viscoelastic materials. SLS model simulation predicted residual forces around 5 mN for elongation up to 20%. We observed strain hardening with additional elongation, which has the potential to cause forces to increase exponentially. Therefore, tensile forces in the NVB should not be ruled out as a contributor to orthodontic relapse, especially in adult patients who may have decreased adaptability of their NVB. Further preclinical and clinical models should be developed to further clarify what is the contribution of the NVB to orthodontic relapse.