Effect of PyC/BN interfacial phases on mechanical behavior of SiC/SiC composites

Abstract

AbstractPyC/BN multiphase interfacial phases were prepared on the surface of SiC fiber preform, then the near stoichiometric ratio SiC fiber reinforced SiC ceramic matrix composites were obtained by polymer impregnation and pyrolysis (PIP) process. The mechanical behavior of SiC/SiC composites was characterized by three‐point bending tests and fracture toughness tests. The stress release and load transfer effects of the interfaces under external loads were analyzed by scanning electron microscope (SEM). Results showed that with the increasing of PyC component thickness from .10 to.30 µm in the PyC/BN multiphase interfacial phases, the bending strength and fracture toughness both increased first and then decreased. The results occurred due to the competition between load transfer and stress release of the interfaces. The relatively optimized interfacial phase structure was that the thickness of the PyC interfacial phase and BN interfacial phase were .20 and.30 µm. The bending strength and fracture toughness of the optimized SiC/SiC composites reached 660.65 MPa and 29.01 MPa•m1/2. Respectively, many matrix cracks appeared in the horizontal and vertical directions, occupying almost the entire fracture section. The growth path of the matrix crack was significantly increased with many long fibers pulled out and broken, which was conducive to the strengthening and toughening of SiC/SiC composites.