Microstructural analysis of asphalt mixtures using digital image processing techniques

Abstract

In this paper, the internal microstructure of asphalt mixture is analyzed through digital image processing (DIP) of two-dimensional asphalt mixture images. A set of 12 mixtures prepared with two binders, two air voids percentages, and different recycled asphalt pavement (RAP) contents is used. First, small asphalt mixture beams of the same size of bending beam rheometer specimens are prepared for the images acquisition. Then, based on mixture volumetric properties, a three-phase material model is obtained. Finally, 2- and 3-point correlation functions of the material phases are numerically evaluated. No significant differences were observed in the microstructure and spatial distributions of aggregates, asphalt mastic, and air voids for asphalt mixtures containing up to 40% of RAP. However, an increase in auto correlation length (ACL) was found for RAP mixtures in comparison with the conventional mixtures.