Calibration of the Ontario Highway Bridge Design Code 1991 edition

Abstract

The paper describes the calculation of load and resistance factors for the Ontario Highway Bridge Design Code (OHBDC) 1991 edition. The work involved the development of load and resistance models, the selection of the reliability analysis method, and the calculation of the reliability indices. The statistical models for load and resistance are reviewed. The considered load components include dead load, live load, and dynamic load. Resistance models are developed for girder bridges (steel, reinforced concrete, and prestressed concrete). A reliability analysis is performed for selected representative structures. Reliability indices are calculated using an iterative procedure. The calculations are performed for bridge girders designed using OHBDC 1983 edition. The resulting reliability indices are between 3 and 4 for steel girders and reinforced concrete T-beams, and between 3.5 and 5 for prestressed concrete girders. Lower values are observed for shorter spans (up to 30–40 m). The acceptance criterion in the selection of load and resistance factors is closeness to the target reliability level. The analysis confirmed the need to increase the design live load for shorter spans. Partial resistance factors are considered for steel and concrete. The criteria for the evaluation of existing bridges are based on the reliability analysis and economic considerations. Key words: bridge code, calibration, load factor, resistance factor, reliability index.