An experimental-analytical scale-linking study on the crack-bridging mechanisms in different types of SHCC in dependence on fiber orientation-Reference-Cited by-同舟云学术

An experimental-analytical scale-linking study on the crack-bridging mechanisms in different types of SHCC in dependence on fiber orientation

Published:2022-02 Issue: Volume:152 Page:106650
ISSN:0008-8846
Container-title:Cement and Concrete Research
language:en
Short-container-title:Cement and Concrete Research

Author:

Curosu Iurie,Muja Erjon,Ismailov Mansur,Ahmed Ameer Hamza,Liebscher Marco,Mechtcherine Viktor

Funder

Deutsche Forschungsgemeinschaft

Publisher

Elsevier BV

Subject

General Materials Science,Building and Construction

Reference43 articles.

1. On engineered cementitious composites (ECC): a review of the material and its applications;Li;J. Adv. Concr. Technol.,2003

2. From micromechanics to structural engineering – the design of cementitious composites for civil engineering applications;Li;J. Struct. Mech. Earthq. Eng.,1993

3. On the shear behavior of engineered cementitious composites;Li;Adv. Cem. Based Mater.,1994

4. Orientation distribution of polyvinyl alcohol fibers and its influence on bridging capacity and mechanical performances for high ductility cementitious composites;Ding;Constr. Build. Mater.,2020

5. Influence of fiber orientation on bridging performance of polyvinyl alcohol fiber-reinforced cementitious composite;Kanakubo;ACI Mater. J.,2016

Cited by 22 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. 3D crack recognition in Engineered Cementitious Composites (ECC) based on super-resolution reconstruction and semantic segmentation of X-ray Computed Microtomography;Composites Part B: Engineering;2024-10

2. Employing limestone and calcined clay for preserving the strain-hardening response of PET fiber-reinforced cementitious composites;Construction and Building Materials;2024-08

3. Assessment on the heterogeneity and roughness of fracture surface of steel fiber reinforced concrete;Construction and Building Materials;2024-08

4. Flexural performance of concrete beams via 3D printing stay-in-place formwork followed by casting of normal concrete;Journal of Sustainable Cement-Based Materials;2024-07-16

5. Experimentally-informed lattice model to simulate the fiber pull-out behavior at the microscale;Construction and Building Materials;2024-07