Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: Interfacial microstructure and mechanical properties-Reference-Cited by-同舟云学术

Evaluation on diffusion bonded joints of TiAl alloy to Ti3SiC2 ceramic with and without Ni interlayer: Interfacial microstructure and mechanical properties

Published:2014-05 Issue: Volume:57 Page:592-597
ISSN:0261-3069
Container-title:Materials & Design
language:en
Short-container-title:Materials & Design

Author:

Liu Jiakun,Cao Jian,Song Xiaoguo,Wang Yifeng,Feng Jicai

Publisher

Elsevier BV

Subject

Applied Mathematics,General Mathematics

Reference26 articles.

1. Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl-based alloys;Zhang;Acta Mater,2000

2. Microstructural control and mechanical properties of Ti–47Al–2Cr–2Nb alloy by directional solidification electromagnetic cold crucible technique;Nie;Mater Des,2012

3. Microstructure and mechanical properties of low and heavy alloyed γ-TiAl+α2-Ti3Al based alloys subjected to different treatments;Imayev;Intermetallics,2012

4. Pressure-assisted combustion synthesis of dense layered Ti3AlC2 and its mechanical properties;Khoptiar;J Am Ceram Soc,2005

5. Rapid synthesis of single-phase Ti3AlC2 through pulse discharge sintering a TiH2/Al/TiC powder mixture;Zou;Scr Mater,2007

Cited by 62 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Microstructure and mechanical properties of transient liquid phase bonding Ti3SiC2 ceramic to SUS430 steel using an Al interlayer;Journal of Iron and Steel Research International;2024-06-25

2. Interface homogenization control and microstructural analysis of ZrC0.85 joints diffusion bonded using Nb and Ti/Nb/Ti as the interlayer;Journal of Materials Research and Technology;2024-05

3. Laser Applications in Ceramic and Metal Joining: A Review;Metals and Materials International;2024-02-06

4. Microstructure and Mechanical Properties of Ti6Al4V to Al2O3 Brazed Joints Using Ti-Ag/Cu-Ti Thin Films;Metals;2024-01-24

5. Brazing of Cr2AlC and 316H stainless steel using BNi-2 filler: Microstructure, properties and joining mechanism;Materials Characterization;2024-01