1. Marasteanu, M., Buttlar, W., Bahia, H. and Williams, C. (2012). “Investigation of Low Temperature Cracking in Asphalt Pavements.”, Report for Minnesota Department of Transportation, National Pooled-Fund Study Phase II, http: //www.lrrb.org. /pdf/201223.pdf.
2. AASHTO. (2019). “Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer.”, AASHTO T313, Washington, DC.
3. LS-299. (2012). “Method of Test for the Determination of Asphalt Cements’ Resistance to Ductile Failure Using Double Edge Notched Tension Test (DENT).”, Rev. No. 27, Laboratory Testing Manual, Ministry of Transportation Ontario.
4. Tabib, S., Hoque, F., Marks, P. (2015). “Ontario’s Strategy to Enhance Asphalt Cement Quality.”, Proc. 60th Annual Conf. Canadian Technical Asphalt Association, 326-346.
5. Johanneck, L., Geib, J., Deusen, D. V., Garrity, J., Hanson, C., Dave, E. (2015). “DCT Low Temperature Fracture Testing Pilot Project”., Research Project No. MN/RC 2015-20, Minnesota Department of Transportation, St. Paul, Minnesota.