Affiliation:
1. Chongqing Vocational College of Science and Creation, Chongqing, China
2. Chongqing Rongweixu Engineering Construction Co., Ltd., Chongqing, China
Abstract
In order to save energy and reduce building energy consumption, the author
pro?posed a study on the impact of composite polystyrene particle thermal
insulation mortar on building energy consumption and thermal energy storage,
take the ETIRS-C residence as the research object, through simulation
calculation under different insulation mortar thickness, analyze the
relationship between insulation thickness and energy consumption and thermal
environment. According to the simulation calculation of room temperature,
horizontally, the thickness of thermal insulation mortar in air conditioning
season is not sensitive to the natural room temperature, there is a certain
sensitivity to the natural room temperature in the heating season, in the
longitudinal direction, the 30 mm thick insulation mortar is the jumping
point, and the increase of the thickness of insulation mortar has no obvious
effect on the natural room temperature. According to the simulation
cal?culation of room energy consumption, the thickness of thermal insulation
mortar is about 20 mm, and both heat and cold consumption have achieved good
thermal insulation and energy saving effect, further increasing the
thickness of thermal insulation mortar will have limited impact on energy
consumption, which may be uneconomical and increase the cost and
construction difficulty. Therefore, based on the aforementioned results, it
can be considered that the thickness of thermal insulation mortar should
preferably be controlled within 20-30 mm.
Publisher
National Library of Serbia
Subject
Renewable Energy, Sustainability and the Environment
Reference15 articles.
1. Natarajan, P., et al., A Comparative Study on Fly Ash Pozzolanic Cement Mortar and Ambient-Cured Alkali-Activated Fly Ash-Ggbs Cement Mortar after Exposure to Elevated Temperature, Innovative Infrastructure Solutions, 7 (2022), 1, pp. 1-11
2. Abdalla, A. A., et al., Microstructure, Chemical Compositions, and Soft Computing Models to Evaluate the Influence of Silicon Dioxide and Calcium Oxide on the Compressive Strength of Cement Mortar Modified with Cement Kiln Dust, Construction and Building Materials, 341 (2022), 2, pp. 63-77
3. Huang, J.,et al., Influence of Polystyrene Microplastics on the Volatilization, Photodegradation and Photoinduced Toxicity of Anthracene and Pyrene in Freshwater and Artificial Seawater, Science of the Total Environment, 819 (2022), 34, pp. 54-57
4. Lz, A., et al., Influence of Materials’ Hygric Properties on the Hygrothermal Performance of Internal Thermal Insulation Composite Systems, Energy and Built Environment, 33 (2022), 2, 11
5. Ren, J., et al., Influence of Composite Structure Design on the Ablation Performance of Ethylene Propylene Diene Monomer Composites, e-Polymers, 21 (2021), 1, pp. 151-159