Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers-Reference-Cited by-同舟云学术

Assessing the quality and productivity of laser cladding and direct energy deposition: Guidelines for researchers

Published:2023-02-01 Issue:1 Volume:35 Page:
ISSN:1042-346X
Container-title:Journal of Laser Applications
language:en
Short-container-title:

Author:

Powell John¹²^ORCID,Koti Daniel¹^ORCID,Garmendia Xabier³^ORCID,Voisey K. T.¹^ORCID

Affiliation:

1. Faculty of Engineering, The University of Nottingham 1 , Nottingham, United Kingdom

2. University of Stuttgart, ICM 2 , D-70569 Stuttgart, Germany

3. Addideba Laser & AM Solutions 3 , Deba, Spain

Abstract

This paper provides guidelines and advice to researchers and engineers in the field of laser cladding and related direct energy deposition techniques to help establish a standardized approach to quality assessment and productivity metrics. Factors considered are deposit geometry, porosity, cracking, dilution, build-up/coverage rate, and powder catchment efficiency.

Publisher

Laser Institute of America

Subject

Instrumentation,Biomedical Engineering,Atomic and Molecular Physics, and Optics,Electronic, Optical and Magnetic Materials

Link

https://pubs.aip.org/lia/jla/article-pdf/doi/10.2351/7.0000897/16704967/012024_1_online.pdf

Reference78 articles.

1. The effect of process parameters and characterization for the laser cladding of cBN based composite clad over the Ti6Al4V alloy;Mater. Chem. Phys.,2022

2. Coaxial laser cladding of cobalt-base alloy Stellite™ 6 on grey cast iron analysis of the microstructural and mechanical properties depending on the laser power;J. Mater. Eng. Perform.,2022

3. Process optimization, microstructure and microhardness of coaxial laser cladding TiC reinforced Ni-based composite coatings;Opt. Laser Technol.,2022

4. Influence of laser power and scanning speed on the formation of single tracks formed by laser cladding;Solid State Phenom.,2021

5. Porosity reduction in WC-12Co laser cladding by aluminum addition;Int. J. Refract. Met. Hard Mater.,2023

Cited by 4 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Gas-particle-heat dynamic coupling simulation in directed energy deposition;International Journal of Mechanical Sciences;2024-08

2. Influence of post-processing heat-treatment on the mechanical performance of AISI 410L stainless steel manufactured by the L-DED process;Journal of Laser Applications;2023-10-30

3. Enhancing productivity and efficiency in conventional laser metal deposition process for Inconel 718 – Part II: advancing the process performance;The International Journal of Advanced Manufacturing Technology;2023-09-13

4. Enhancing productivity and efficiency in conventional laser metal deposition process for Inconel 718 - part I: the effects of the process parameters;The International Journal of Advanced Manufacturing Technology;2023-09-07