AN ANALYSIS OF THE WEAR OF PLOUGHSHARES WITH VARIOUS TECHNOLOGICAL SOLUTIONS

Abstract

The paper analyses wear processes in various technological forms of ploughshares. Tests involved ploughshares made of Hardox 500, B 27 and 38GSA steel, as well as Hardox 500 steel with the cutting edges hardfaced by means of an El – Hard 63 electrode on the front and back sides, as well as 38GSA steel hardfaced by means of an EStelMn60 electrode. The tests were conducted during natural operation when processing sandy soil. During the tests, the changes in the mass and geometry of ploughshares were measured as a function of the processed area. Ploughshares made of steel were characterised by a diverse martensitic microstructure. The hardfaced layers, on the other hand, were dominated by chromium carbides with alloy ferrite. It has been concluded that the use of hardfaced layers considerably impact the decrease in the intensity of wear of the tested working elements. On the other hand, no significant differences were observed in the wear processes of hardfaced ploughshares depending on the native and additional material and the place of the application of the hardfacing agent. In the analysed soil conditions, ploughshares made of steel did not exhibit any significant differences in the wear process.