Affiliation:
1. University of Warmia and Mazury in Olsztyn, Faculty of Technical Sciences
Abstract
This paper presents the results of tests for Hardox Extreme Steel wear rate in an abrasive mass of varying
moisture contents. The tests were conducted by the “rotating bowl” method using quartz sand with a grain size
of 0.5–1.4 mm. The obtained test results show that an abrasive mass with a moisture content of 7% exhibits
the lowest rate of steel abrasive wear. However, the highest wear rate was noted for an abrasive mass with
a moisture content of 14%. A further increase in moisture content resulted in a decrease in the steel wear rate.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献