Alternative analytical models for HTS tapes considering their AC hysteretic and resistive losses

Abstract

Abstract This work proposes two alternative analytical models to evaluate the ac losses of high-temperature superconducting (HTS) tapes during their hysteretic and resistive modes. These models intend to extend the application range of state-of-the-art analytical models for current values higher than the critical one, i.e. for the resistive state, and to correctly predict the ac losses during the transition between the hysteretic and resistive modes. Two analytical models are proposed, one considering an extension of the Norris model for the HTS tape’s resistive mode and the other based on a sigmoid function to characterize the hysteretic losses and their smooth transition to the resistive mode. Analytical models capable of estimating ac losses of superconducting (SC) tapes are an important tool for the design of complex SC systems, such as SC fault current limiters, SC electrical machines and SC cables. The proposed models are validated experimentally, for a 1st generation BSCCO tape and a 2nd generation REBCO tape. Finite element simulation is also carried out to verify the accuracy of the proposed models. Results show that the proposed extended-Norris model presents some deviation at the transition between the hysteretic and resistive modes, while the sigmoid model presents very accurate results for the whole spectrum of applied current. Also, the parameters of the sigmoid models are independent of the tape geometry.