A Study on TiO2-CeO2 nanocomposite coatings for corrosion protection of 304LN stainless steel

Abstract

Abstract Nano composite coatings are used to modify the substrate properties for a better life of the structures exposed to saline environments. Using a method known as spin coating, the authors of this study coated 304LN stainless steel with a mixture of TiO2 and CeO2 nano particles. The ratio of TiO2 to CeO2 in the coatings was 1:5:10:20 by weight percent. Stainless steel 304 was used as a substrate for the deposition of coatings since it is reasonably affordable. The effect that 3.5 weight percent NaCl solution had on the wett ability of the coating and its resistance to corrosion was investigated. The end effect is improved corrosion resistance in line with the rising coating weight percentage. After being exposed to the solution for 600 hours, the corrosion was significantly decreased. X-ray diffraction (XRD) and scanning electron microscopy (SEM) coupled to energy dispersive spectroscopy were used to investigate the deposits (EDS). The nano composites’ inherent physical features ensure their continued presence on the surface. The ratio of surface area to volume is satisfactory. According to the contact angle, the amount of water that is spreading out is extremely little. The photo produced cathodic protection feature of the TiO2-CeO2 coating is shown by the results of spin coating methods applied on 304LN stainless steel that was previously coated with TiO2-CeO2. After being subjected to the corrosion test, the coating made of 10% TiO2-CeO2 exhibited no signs of pitting or pinholes. The structural equation modeling (SEM) studies backed this conclusion. When it comes to the resistance to corrosion, the results produced by the contact angle are better. As a consequence of this finding, it was concluded that the coating could withstand the NaCl attack.