Study on the Expansion of Primary Flow for the Mixing Uniformity in the Two-Phase Ejector

Abstract

Abstract The expansion of primary flow in the suction chamber of the CO2 two-phase ejector is investigated and its influences on the mixing characteristics are analyzed. An ejector model is developed, by constructing differential equations for mass, momentum and energy then get the governing equation. In the suction chamber, the expansion of primary flow and the compression of secondary flow are modeled along the flow path. Based on the constant-pressure mixing theory, the pressure equilibrium positions of two stream (namely at the inlet and inside of mixing chamber, respectively) are considered. The mass and energy transfer in the mixing chamber were analyzed by using the double-flow model formulation. The ejector performance parameters are obtained for the different operation conditions, and the distributions of temperature and velocity of two streams in the mixing chamber are presented. The simulation results showed the influence of primary flow expansion on the pressure lift ratio was relatively obvious, and the larger expansion distance was helpful to improve the mixing efficiency and decrease the thermodynamic entropy change during the mixing. Moreover, the temperature of secondary flow for lower primary flow pressure presented larger descent rates at the initial of mixing. This work is helpful for the improvement of ejector theoretical model and the optimization design.