Pulsed gas–liquid discharge plasma catalytic degradation of bisphenol A over graphene/CdS: process parameters optimization and O3 activation mechanism analysis

Abstract

Abstract In the present work, pulsed gas–liquid hybrid discharge plasma coupled with graphene/CdS catalyst was evaluated to eliminate bisphenol A (BPA) in wastewater. The optimization of a series of process parameters was performed in terms of BPA degradation performance. The experimental results demonstrated that nearly 90% of BPA (20 mg l−1) in the synthetic wastewater (pH = 7.5, σ = 10 μS m−1) was degraded by the plasma catalytic system over 0.2 g l−1 graphene/CdS at 19 kV with a 4 l min−1 air flow rate and 10 mm electrode gap within 60 min. The BPA removal rate increased with increasing the discharge voltage and decreasing the initial BPA concentration or solution conductivity. Nevertheless, either too high or too low an air flow rate, electrode gap, catalyst dosage or initial solution pH would lead to a decrease in BPA degradation. Moreover, optical emission spectroscopy was used to gain information on short-lived reactive species formed from the pulsed gas–liquid hybrid discharge plasma system. The results indicated the existence of several highly oxidative free radicals such as ·O and ·OH. Finally, the activation pathway of O3 on the catalyst surface was analyzed by density functional theory.