Author:
HUNT M. L.,ZENIT R.,CAMPBELL C. S.,BRENNEN C. E.
Abstract
In 1954 R. A. Bagnold published his seminal findings on the rheological properties of
a liquid–solid suspension. Although this work has been cited extensively over the last
fifty years, there has not been a critical review of the experiments. The purpose of this
study is to examine the work and to suggest an alternative reason for the experimental
findings. The concentric cylinder rheometer was designed to measure simultaneously
the shear and normal forces for a wide range of solid concentrations, fluid viscosities
and shear rates. As presented by Bagnold, the analysis and experiments demonstrated
that the shear and normal forces depended linearly on the shear rate in the ‘macro-viscous’ regime; as the grain-to-grain interactions increased in the ‘grain-inertia’
regime, the stresses depended on the square of the shear rate and were independent of
the fluid viscosity. These results, however, appear to be dictated by the design of the
experimental facility. In Bagnold’s experiments, the height (h) of the rheometer was
relatively short compared to the spacing (t) between the rotating outer and stationary
inner cylinder (h/t = 4.6). Since the top and bottom end plates rotated with the
outer cylinder, the flow contained two axisymmetric counter-rotating cells in which
flow moved outward along the end plates and inward through the central region of
the annulus. At higher Reynolds numbers, these cells contributed significantly to the
measured torque, as demonstrated by comparing Bagnold's pure-fluid measurements
with studies on laminar-to-turbulent transitions that pre-date the 1954 study. By
accounting for the torque along the end walls, Bagnold’s shear stress measurements
can be estimated by modelling the liquid–solid mixture as a Newtonian fluid with
a corrected viscosity that depends on the solids concentration. An analysis of the
normal stress measurements was problematic because the gross measurements were
not reported and could not be obtained.
Publisher
Cambridge University Press (CUP)
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics
Cited by
110 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献