Preparation and properties of stainless steel filament/pure cotton woven fabric-Reference-Cited by-同舟云学术

Preparation and properties of stainless steel filament/pure cotton woven fabric

Published:2024-01-01 Issue:1 Volume:24 Page:
ISSN:2300-0929
Container-title:AUTEX Research Journal
language:en
Short-container-title:

Author:

Yan Taohai¹²,Shi Yajing¹,Zheng Jiankun¹,Huang Luming³,Lin Chaowang⁴,Chen Zhi¹

Affiliation:

1. Fujian Key Laboratory of Novel Functional Textile Fibers and Materials, Minjiang University , Fuzhou , Fujian 350108 , China

2. Guobin Yaqi Textile Co., Ltd. , Yinchuan , Ningxia 751400 , China

3. Chunhui Technology Group Co., Ltd , Fuzhou , Fujian 350018 , China

4. Fujian Donglong Knitting Co., Ltd. , Fuzhou , Fujian 350018 , China

Abstract

Abstract The flame-retardant cotton fabric used for welding protective clothing in the market exhibits insufficient melt hole resistance. We evaluated the stainless steel filament fabric for flame retardancy and melt hole resistance and found that it lacked sufficient comfort. A stainless steel filament and a cotton yarn were plied and twisted together and then woven following a set of specifications. The fabric was finished with a flame retardant, and its performance and flame retardancy were determined. The results indicate that the twist direction during ply twisting affects the fabric performance. Relative to the pure cotton fabric, the stainless steel filament/cotton composite fabric exhibits reduced comfort properties, such as moisture permeability and air permeability, but the mechanical properties and flame retardancy are improved. Ply twisting a stainless steel filament and a pure cotton yarn with an S twist presents certain advantages in enhancing the comprehensive performance of the fabric and exhibits potential for advancements in welding protective clothing.

Publisher

Walter de Gruyter GmbH

Subject

General Materials Science

Link

https://www.degruyter.com/document/doi/10.1515/aut-2023-0011/pdf

Reference38 articles.

1. Fernandez-Pello, A. C., Lautenberger, C., Rich, D., Zak, C., Urban, J., Hadden, R., et al. (2015). Spot fire ignition of natural fuel beds by hot metal particles, embers, and sparks. Combustion Science and Technology, 187(1–2), 269–295.

2. Mobarak, Y., Alshehri, A. (2016). Perspectives of safe work practices: Improving personal electrical safety of low-voltage systems from electrical hazards. Engineering, Technology & Applied Science Research, 6(6), 1307–1315.

3. Asmita, K. B., Panduragan, S. L., Nambiar, N., Yahya, F. (2022). Occupational hazards, the use of PPE, and health impacts among welders in Sumedang, West Java, Indonesia. Malaysian Journal of Medicine & Health Sciences, 18, 243–249.

4. Venkataraman, D., Shabani, E., Park, J. H. (2023). Advancement of nonwoven fabrics in personal protective equipment. Materials, 16(11), 3964.

5. Leonov, V. P., Mikhaylov, V. I. (2020). Protection of welded joints from oxidation at welding of titanium alloys. Inorganic Materials: Applied Research, 11(6), 1423–1427.