Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion-Reference-Cited by-同舟云学术

Recent progress on additive manufacturing of multi-material structures with laser powder bed fusion

Published:2022-02-03 Issue:2 Volume:17 Page:329-365
ISSN:1745-2759
Container-title:Virtual and Physical Prototyping
language:en
Short-container-title:Virtual and Physical Prototyping

Author:

Wang Di¹,Liu Linqing¹,Deng Guowei¹,Deng Cheng¹,Bai Yuchao²,Yang Yongqiang¹,Wu Weihui³,Chen Jie¹,Liu Yang⁴,Wang Yonggang⁴,Lin Xin⁵^ORCID,Han Changjun¹^ORCID

Affiliation:

1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou, People’s Republic of China

2. Department of Mechanical Engineering, National University of Singapore, Singapore, Singapore

3. School of Intelligent Engineering, Shaoguan University, Shaoguan, People’s Republic of China

4. Laboratory of Impact and Safety Engineering, Ministry of Education, Ningbo University, Ningbo, People’s Republic of China

5. State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, People’s Republic of China

Funder

National Natural Science Foundation of China

Research and development plan in key areas of Guangdong Province

Guangdong Province Science and Technology Project

Publisher

Informa UK Limited

Subject

Industrial and Manufacturing Engineering,Computer Graphics and Computer-Aided Design,Modeling and Simulation,Signal Processing

Link

https://www.tandfonline.com/doi/pdf/10.1080/17452759.2022.2028343

Reference132 articles.

1. Aerosint. 2021. “CuCrZr/316L Heat Exchanger.” Accessed August 1, 2021. https://aerosint.com/heat-exchanger/.

2. Characteristics of the bond in Cu–H13 tool steel parts fabricated using SLM

3. Metallurgical and mechanical assessment of hybrid additively-manufactured maraging tool steels via selective laser melting

4. Dual interfacial characterization and property in multi-material selective laser melting of 316L stainless steel and C52400 copper alloy

5. Additive manufacturing of multi-material structures

Cited by 170 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Comprehensive review: Advancements in modeling geometrical and mechanical characteristics of laser powder bed fusion process;Optics & Laser Technology;2025-01

2. Research on microstructure and properties enhancement of TiN/GH5188 Co-superalloy composite fabricated by laser powder bed fusion;Materials Science and Engineering: A;2024-10

3. Process optimization, interfacial characteristics, and mechanical properties of titanium-tantalum multi-material structures fabricated via laser powder bed fusion;Materials Science and Engineering: A;2024-10

4. Comparative analysis of mechanical properties enhancement in SCM440 through similar and dissimilar material deposition using directed energy deposition method;Journal of Materials Research and Technology;2024-09

5. Melt pool behavior of pure copper-stainless steel multi-materials fabricated by the coaxial hybrid blue-infrared lasers additive manufacturing;Journal of Manufacturing Processes;2024-09