Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components-Reference-Cited by-同舟云学术

Selective Laser Sintering as Manufacturing Process for the Realization of Complex Nuclear Fusion and High Heat Flux Components

Published:2017-09-12 Issue:4 Volume:72 Page:667-672
ISSN:1536-1055
Container-title:Fusion Science and Technology
language:en
Short-container-title:Fusion Science and Technology

Author:

Neuberger Heiko¹^ORCID,Rey Joerg¹,Hees Manuel¹,Materna-Morris Edeltraud²,Bolich Daniel²,Aktaa Jarir²,Meier Andreas²,Fischer Stephen³,Schorle Cornelia⁴,Fuhrmann Uwe⁵,Heger Rainer⁵,Dlouhý Ivo⁶,Stratil Ludek⁶,Kloetzer Bernhard⁷

Affiliation:

1. Karlsruher Institut für Technologie, INR-DAF, Germany

2. Karlsruher Institut für Technologie, IAM, Germany

3. Karlsruher Institut für Technologie, TEC, Germany

4. Karlsruher Institut für Technologie, IMVT, Germany

5. Karlsruher Institut für Technologie, ITEP, Germany

6. Institute of Physics of Materials ASCR, Brno, Czech Republic

7. BKL-Lasertechnik, Germany

Publisher

Informa UK Limited

Subject

Mechanical Engineering,General Materials Science,Nuclear Energy and Engineering,Nuclear and High Energy Physics,Civil and Structural Engineering

Link

https://www.tandfonline.com/doi/pdf/10.1080/15361055.2017.1350521

Reference14 articles.

1. Progress in the KIT approach for development of the HCPB TBM stiffening plate feasibility mock up fabrication

2. The European ITER Test Blanket Modules: Current status of fabrication technologies development and a way forward

3. Current progress of Chinese HCCB TBM program

4. Manufacturing pre-qualification of a Short Breeder Unit mockup (SHOBU) as part of the roadmap toward the out-of-pile validation of a full scale Helium Cooled Pebble Bed Breeder Unit

5. Thermo-hydraulic testing and integrity of ITER Test Blanket Module (TBM) First Wall mock-up in JAEA

Cited by 17 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Additive manufacturing of W/RAFM hypervapotron plasma-facing components and the steady state thermal fatigue behavior;Journal of Nuclear Materials;2024-12

2. Challenges and issues in manufacturing of components using polymer-based selective laser sintering (SLS): a review;International Journal on Interactive Design and Manufacturing (IJIDeM);2024-08-08

3. Low cycle fatigue behavior of additive manufactured 316LN stainless steel at 550 °C: Effect of solution heat treatment;International Journal of Fatigue;2024-02

4. Comparison of electron-beam-welded joints manufactured by rolled and selective laser melted reduced activation ferritic/martensitic steel;Journal of Materials Research and Technology;2024-01

5. Cold Spray metal powder deposition with 9 %Cr-steel applied for the HCPB First Wall fabrication: Proof of concept and options for ODS steel processing;Nuclear Materials and Energy;2023-06