Development and validation of an enhanced test setup for assessing HMA stripping potential under hydrodynamic pressure-Reference-Cited by-同舟云学术

Development and validation of an enhanced test setup for assessing HMA stripping potential under hydrodynamic pressure

Published:2019-01-27 Issue:7 Volume:21 Page:2024-2039
ISSN:1468-0629
Container-title:Road Materials and Pavement Design
language:en
Short-container-title:Road Materials and Pavement Design

Author:

Hu Xiaodi¹,Jiang Meng¹²,Bai Tao¹,Pan Pan¹,Walubita Lubinda F.³

Affiliation:

1. School of Civil Engineering and Architecture, Wuhan Institute of Technology, Wuhan, People’s Republic of China

2. Wuhan Hanyang Municipal Construction Group Corporation, Wuhan, People’s Republic of China

3. TTI – The Texas A&M University System, College Station, TX, USA

Funder

National Natural Science Foundation of China

Wuhan Institute of Technology

Publisher

Informa UK Limited

Subject

Civil and Structural Engineering

Link

https://www.tandfonline.com/doi/pdf/10.1080/14680629.2019.1568289

Reference52 articles.

1. Al-Qadi, I. L., Fini, E. H. & Dessouky, S. H. (2006). Adhesion of hot-poured crack sealants to aggregates. Presented at 85th Annual Meeting of the Transportation Research Board.

2. American Association of State Highway Transportation Officials. (2003). Standard method of test for resistance of compacted asphalt mixtures to moisture-induced damage, AASHTO T 283. Washington, DC.

3. American Association of State Highway Transportation Officials. (2004). Standard method of test for Hamburg wheel-track testing of compacted hot mix asphalt (HMA), AASHTO T 324. Washington, DC.

4. American Association of State Highway Transportation Officials. (2012). Standard specification for Superpave volumetric mix design, AASHTO M 323. Washington, DC.

5. Influence of Air Void Distribution on the Moisture Susceptibility of Asphalt Mixes

Cited by 9 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Hydrostatic stability of steel-slag porous asphalt mixture based on freeze-thaw cycle testing;Case Studies in Construction Materials;2024-12

2. Moisture-Induced Deterioration Mechanism of Asphalt Mortar Using Different Fillers;Journal of Materials in Civil Engineering;2024-11

3. Design optimization and performance evaluation of metakaolin-based geopolymer filled porous (semi-flexible) asphalt mixture;Construction and Building Materials;2023-12

4. Research on Water Stability and Moisture Damage Mechanism of a Steel Slag Porous Asphalt Mixture;Sustainability;2023-10-17

5. Adhesion Properties of Recycled High-Viscosity Asphalt–Aggregate Interface under Dynamic Water Erosion;Materials;2023-09-14