On the tensile flow stress response of 304 HCu stainless steel employing a dislocation density based model and electron backscatter diffraction measurements-Reference-Cited by-同舟云学术

On the tensile flow stress response of 304 HCu stainless steel employing a dislocation density based model and electron backscatter diffraction measurements

Published:2019-10-22 Issue:3 Volume:100 Page:312-336
ISSN:1478-6435
Container-title:Philosophical Magazine
language:en
Short-container-title:Philosophical Magazine

Author:

Yadav Surya D.¹^ORCID,Vijayanand V. D.²³,Nandgopal M.²,Prasad Reddy G. V.²⁴^ORCID

Affiliation:

1. Department of Metallurgical Engineering, Indian Institute of Technology (BHU), Varanasi, India

2. Materials Development and Technology Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, India

3. Department of Mechanical Engineering, University of Bristol, Bristol, UK

4. Homi Bhabha National Institute, Kalpakkam, India

Publisher

Informa UK Limited

Subject

Condensed Matter Physics

Link

https://www.tandfonline.com/doi/pdf/10.1080/14786435.2019.1680887

Reference54 articles.

1. Microstructure Evolution of a Novel Super304H Steel Aged at High Temperatures

2. Microstructures and tensile properties of 304 steel with dual nanocrystalline and microcrystalline austenite content prepared by aluminothermic reaction casting

3. Microstructure and mechanical properties of annealed SUS 304H austenitic stainless steel with copper

4. Choice of welding consumable and procedure qualification for welding of 304HCu austenitic stainless steel boiler tubes for Indian Advanced Ultra Super Critical power plant

Cited by 12 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. An approach for identifying the deformation-induced strain from tensile tests and x-ray diffraction measurements;Canadian Metallurgical Quarterly;2024-05-15

2. Microstructure Based Flow Stress Modelling of Superalloy 718;Solid State Phenomena;2023-12-05

3. Surface roughness after turning the austenitic 08X18H10 steel alloyed with copper and manganese depending on structure and properties formed by the intensive plastic deformation;Proceedings of Higher Educational Institutions. Маchine Building;2023-04

4. An improved dislocation density reliant model to address the creep deformation of reduced activation ferritic martensitic steel;Forces in Mechanics;2022-12

5. An advanced mean field dislocation density reliant physical model to predict the creep deformation of 304HCu austenitic stainless steel;Materials Today Communications;2022-08