Critical pressure (Pc) and critical temperature (Tc) of Midra shale

Abstract

AbstractThe critical pressure (Pc) and critical temperature (Tc) of shale gas depend on the characteristic pore size because of the importance of fluid–rock interactions in the matrix. This size dependency is neglected in highly permeable formations, where gas composition is only implemented because the fluid–fluid interactions are dominant. This study determines the critical properties by accounting for the characteristic pore size in the shale matrix and gas composition. The analyzed components are carbon dioxide, ethane, methane, n-butane, nitrogen, pentane, and propane. It shows that the bulk properties overestimate the actual critical properties. The overestimation varies between 15 and 26% in a uniform 5 nm conduit with a circular cross section, and it increases nonlinearly when decreasing the conduit size. Overestimation versus size is presented to provide a convenient tool for correcting the existing data. This study also determines the critical properties of Midra shale by accounting for the pore-throat size and pore-body size distributions. The former distribution is based on the mercury injection capillary pressure measurements of eight samples, whereas the latter is based on the nitrogen adsorption measurements of six samples. This study indicates that common bulk properties overestimate the critical properties of the studied shale between 5 and 22%. The results have applications in characterizing multiphase transport in shale gas reservoirs.