Ductile shear damage micromechanisms studied by correlative multiscale nanotomography and SEM/EBSD for a recrystallized aluminum alloy 2198 T8

Abstract

AbstractThe damage mechanisms of ductile fracture under shear loading of an aluminum alloy 2198T8R were studied using flat thin-sheet samples. One sample was loaded until 85% of the failure displacement and then unloaded, and another one was loaded up to failure. To overcome the inherent shortcomings of nanotomography concerning the investigation of flat samples, synchrotron nano-laminography was applied to the pre-loaded sample and provided structural information down to the nanometer scale, allowing ductile damage nucleation and evolution to be studied. The damage features, including flat cracks and intermetallic particle-related damage, were visualized in 3D from the highly-deformed shear band region. Using nano-laminography, no nano-voids were found. The damaged shear ligament was also observed after polishing via destructive correlative scanning electron microscope (SEM) and electron back-scatter diffraction (EBSD) which suggests that the detrimental flat cracks were both intergranular and transgranular. The flat cracks were related to highly-deformed bands. No nano-voids could be found using SEM analysis. Fractography on the second broken sample revealed that the flat cracks contained hardly observable nanometer-sized dimples. The final coalescence region was covered by sub-micrometer-sized dimples, inside which dispersoid particles were present. The fact that no nano-void was found for the pre-deformed sample implies that the nucleation, growth and coalescence of these sub-micrometer-sized voids occur at late stages of the loading history.